Owner | Andre |
---|---|
Location | Bamberg , Bavaria Germany map |
Web/Email | WebPage |
Vehicle | 2002 Suzuki GSXR e899 K2 |
Motor | QS 273 80H Brushless DC |
Drivetrain | QSMOTOR 273 80H Hubmotor |
Controller | Kelly KHB14601C / Kelly KLS 8080I 14401C / Emsiso 1. KHB 14601C, 144VDC/176,4VDC, 600A peak (Problems during acceleration) 2. KLS 8080I 14401C, 144VDC/176,5VDC, 400A peak (No problems during acceleration but to week (only 400A peak!) but top speed after 740m (200,49 kph, GPS measured) 3. Emsiso EmDrive500, 100kVA, 120V, 500Arms/800Arms, @900Arms (secondary current protection) actually fastest hubmotor ev on 1/4 mile (12,278 seconds @ 170kph) |
Batteries | 42 Turnigy Heavy Duty 5000mAh, 6S/4S 6, 60/120C, 6.00 Volt, Lithium-Polymer At the beginning I started with seven 6S batteries in series, four parallel) With Emsiso controller I changed to 4x6S and 1x4S in series) |
System Voltage | 175 Volts |
Charger | Turnigy 4 Core Charger 2x 4 Core charger by charging all batteries separately. |
DC/DC Converter | Separate 4S LiFePo battery (16000mAh) |
Top Speed | 124 MPH (199 KPH) I reached top speed by 176VDC after 740m with KLS14401C |
Acceleration | 4,48 seconds (0-100kph) |
Range | 10 Miles (16 Kilometers) Have never tested but can go 3 times 1/4 mile by approximately 1,2 miles per round |
Seating Capacity | 1 person |
Curb Weight | 363 Pounds (165 Kilograms) |
Tires | Hoosier 22/2.5-17 @ 3,5x17 rim Hoosier 27.5/4.5-17 @ 4.5x17 hubmotor rim |
Conversion Time | Phase I: Starting 2016 (Oktober) - March 2017 after that testing ... (KHB14601) Phase II: Starting August 2017 - September 2017 (KLS 14401) Phase III: Starting October 2017 - March 2018 (Emsiso EmDrive500) Phase IV: Conversation to chain drive .... |
Conversion Cost | :-) |