Owner | Pete Jorgensen | ||||
---|---|---|---|---|---|
Location | Ashland, Oregon United States map | ||||
Vehicle | 1958 Nash Metropolitan | ||||
Motor | HPEVS AC-50 3-Phase AC 3 Phase Ac | ||||
Drivetrain | Original 3 speed Transmission & Diferential | ||||
Controller | Curtis 1238 650 amp | ||||
Batteries | 32 Thunder Sky 160 ah, 3.60 Volt, Lithium-Ion Batteries protected by Mini BMS from Clean Power Auto LLC | ||||
System Voltage | 115 Volts | ||||
Charger | Elcon 4 KW 4 KW - 110/220 Volt Supply | ||||
Heater | I gutted the heater core shroud, fabricated a mount plate & installed a 1500W ceramic heating element from KTA & 12 volt muffin fan from Digitech. This was interesting since the shroud is round & everything else is square. | ||||
DC/DC Converter | Elcon 30 Amp | ||||
Instrumentation | Curtis 840: RPM Volts, Amps, State of Charge & Volt/Amp etc from BMS | ||||
Acceleration | More than enough. | ||||
Range | 55 Miles (88 Kilometers) | ||||
Watt Hours/Mile | 310 Wh/Mile | ||||
EV Miles |
| ||||
Seating Capacity | 2 Adults and one child (small rear seat) | ||||
Curb Weight | 2,250 Pounds (1,022 Kilograms) Original curb weight 1890 Lbs. | ||||
Tires | 5.60 x 13 (original size) | ||||
Conversion Time | Approximately 4 months plus about 12 months on restoration of the Metro. | ||||
Conversion Cost | Total cost of car & conversion $30,000. The car & restoration was about $11,000 of that. |