Owner | Gary Bulmer | ||||
---|---|---|---|---|---|
Location | Knoxville, Tennessee United States map | ||||
Vehicle | 1989 Blakely Bernardi Kit car, first titled in 1989. Used a Mustang II as donor. Conversion by owner with fabrication and mechanical work by Gill Welding. | ||||
Motor | Netgain Transwarp 9 Series Wound DC | ||||
Drivetrain | Transwarp 9, Lenco street 2 speed (1.48:1 and 1:1) with reverse, Mustang 8.8 rear end (4.88:1) | ||||
Controller | NetGain Controls Warp Drive 144 v, 1000 amp | ||||
Batteries | 45 China HiPower 100 ah, 3.20 Volt, Lithium Iron Phosphate Two packs in series, 24 cells in the trunk, 21 cells under the hood. | ||||
System Voltage | 144 Volts | ||||
Charger | Manzanita Micro PFC-20 | ||||
Heater | Custom ceramic. | ||||
DC/DC Converter | Iota 108 vdc - 190 vdc 55a DC/DC converter | ||||
Instrumentation | Netgain Interface Module, 180v Voltmeter, 12v voltmeter, speedometer, tachometer, battery amps, and motor amps. | ||||
Top Speed | 80 MPH (128 KPH) Calculated, based on Netgain max RPM of 5,500. Amps between 200 and 250 and RPM at 4,000 at 62 MPH. Perfect, with a speed limit of 55. It handles well up to 70 MPH on the interstate. | ||||
Acceleration | Very quick acceleration off the line. | ||||
Range | 35 Miles (56 Kilometers) | ||||
Watt Hours/Mile | 300 Wh/Mile | ||||
EV Miles |
| ||||
Seating Capacity | 2 adults | ||||
Curb Weight | 2,200 Pounds (999 Kilograms) | ||||
Tires | Michelin Harmony, P185/65R15, 44 psi. | ||||
Conversion Time | 17 months | ||||
Conversion Cost | Over $40K | ||||
Additional Features | Elithion BMS, still not installed. | ||||
Mechanical and fabrication work by Gill Welding and Fabrication, gillwelding.com. Electrical work done by me. |