Owner | Bertil Stam |
---|---|
Location | Saigon, Vietnam Vietnam map |
Vehicle | 2007 Yamaha TTR250 Saigon normally only have scooters with a limit to 150cc...so it was kind of hard to find a bigger bike, this one is in good quality, and i brought it without the engine |
Motor | Briggs and Stratton ETEK-RT Permanent Magnet DC its on the way, I have looked for info on the performance curve, but did not find any available over 142 amp...kind of low, talked to the manufacture, he say it can take up to 250 amp for 5 sec depending on cooling way...i had hoped for 350 amp...guess that is not to be, maybe the Agni 95 is better |
Drivetrain | sprocket 52 teeth on back |
Controller | Alltrax 7245 after talking to Tony at altraxx, i am going for the 7245, and will adjust it to limit the amp for the motor |
Batteries | local brand, dong nai, 12.00 Volt, Lead-Acid, Gel first I test with this, later when I have the money then I go for LiFePO |
System Voltage | 72 Volts |
Charger | not decided, but some cheap Chinese one to charge over night |
Heater | Saigon is 30+ daily temp...should have an aircon if any |
DC/DC Converter | a standard model from LMC outlet...not sure what it is |
Top Speed | i will gear it for 75-85 KM/h |
Acceleration | hoping for a fast acceleration, but the bike will be heavy, and i am around 100 kg, so that's a lot of weight to carry |
Range | needs to go at least 40 km |
Seating Capacity | me at first, but would like to take wify as well... |
Curb Weight | 0 bike base weight is 70 kg...then add batteries-motor...and me |
Tires | stock, off road, will give a little sound when running |
Conversion Cost | frame was 1300 usd...hard to find a big bike in Saigon, the aim is less than 5K then 2500 usd for the component. still need the batteries |
Additional Features | my profession is design, so it might take long time to convert and get it finished, it should look nice in the end... |
I am a total newbie in EV conversions, so for now the frame is there, the EPS foam boxes are there, but all hardware is undecided, guess I will end up needing some help from some more knowledge people...but lets see...motto, if you don't try, you never succeed |